The set is designated for drilling of openings into pipelines made of steel for the temporary suspension of the media flow as under positive pressure using stoppling FS adapting pieces (following the sheet part 5 of this catalogue).
For the sake of inspection, de-aeration or de-gassing of a closed section (for instance in case of two-side closure), the set may be provided with stopplers and a de- aeration system– following the sheet part 1.4 of the catalogue. The set contains basic accessories as specified in the set content description.
RANGE OF APPLICATION
a) Diameter of pipeline drilled: no limit
Diameter of drilled opening: *
ø20, 25, 35, 40 a 51 mm
Drilled pipeline material:
Steel, other material should be consulted with the manufacturer
b) Diameter of the closed pipeline:
DN/ID 25, 32, 40 a 50 mm (1" up to 2")
Drilled pipeline material:
Welding steel, other material should be consulted with the manufacturer
Media:
Natural gas, water, other non-aggressive gases or liquids. Other media should be consulted with the manufacturer
Maximum pressure in the drilled pipeline: *
Up to 4 bar
Working temperature: viz. sheet 1.2
* The range may be modified using optional accessories (Following the sheet 1.2-2) to values specified in 1.2
TECHNICAL PARAMETERS
Outer thread connection of drilled-in body:
G2” outer diameter to EN 228-1:2003
Overall length with drilling rod fully retracted (without chamber being assembled):
730 mm
Maximum drilling rod protrusion with assembled chamber F-M 2”-2.5” L95 (measured from the contact surface of the of connection thread):
270 mm (+ 70 mm with movement body fully screwed in)
Maximum width:
200 mm
Weight of assembled set / weight including transport box:
9 / 38 kg
CONTENTS OF THE KIT COMPACT-F1 / STOPL
| Item No. | Name | Catalogue No. | |
| 1. | Set COMPACT-F1/STOPL | 121-1500-001 | |
| The set contains: | |||
| 2. | Drilling body COMPACT-F1 PN 16 | 122-2000-001 | 1pcs |
| 3. | Drilling rod 18/750 | 142-2101-075 | 1pcs |
| 4. | Pressure gauge angle piece 0 - 4 bar | 142-2405-400 | 1pcs |
| 5. | Drilling bit FKS 25 | 142-2200-025 | 2pcs |
| 5. | Drilling bit FKS 35 | 142-2200-035 | 2pcs |
| 5. | Drilling bit FKS 40 | 142-2200-040 | 2pcs |
| 5. | Drilling bit FKS 51 | 142-2200-051 | 2pcs |
| 6. | Expanding stoppler trn 1" | 142-2501-002 | 1pcs |
| 6. | Expanding stoppler 5/4" | 142-2501-003 | 1pcs |
| 6. | Expanding stoppler 6/4" | 142-2501-004 | 1pcs |
| 6. | Expanding stoppler 2" | 142-2501-005 | 1pcs |
| 7. | Centering pilot 8/80 | 142-2403-001 | 2pcs |
| 7. | Centering pilot 8/100 | 142-2403-002 | 1pcs |
| 8. | Chamber F-M 2"-2,5" L42 | 142-2401-001 | 1pcs |
| 9. | Chamber F-M 2"-2,5" L95 | 142-2401-003 | 1pcs |
| 10. | Ball valve FF 2,5" PR 65 | 212-2010-004 | 1pcs |
| 11. | Plug rod with internal square | 142-2502-001 | 1pcs |
| 12. | Fixed magnet 24/135 | 122-2000-006 | 1pcs |
| 13. | Protective case | 122-2000-003 | 1pcs |
| 14. | Allen wrench No. 3 | 142-2103-003 | 1pcs |
| 15. | Allen wrench No. 5 | 142-2103-005 | 1pcs |
| 16. | Ratchet ½” | 142-2103-001 | 1pcs |
| 17. | Hook spanner 75 - 80 | 142-2103-075 | 1pcs |
| 18. | Spanner No. 27 | 142-2104-027 | 2pcs |
| 19. | Sealing tape PTFE GAS 15mm | 212-2010-037 | 1pcs |
| 20. | Transport box COMPACT-F1 | 122-2000-002 | 1pcs |
| 21. | Spare parts set COMPACT-F1 | 122-2000-004 | 1 set |
OPTIONAL ACCESSORIES
| Item No. | Name | Catalogue No. |
| 1 | Drilling rods | sheet 1.4-2.1 |
| 2 | Pressure gauge parts | sheet 1.4-2.4 |
| 3 | Drilling bit FKS (for steel) | sheet 1.4-2.2 |
| 4 | Drilling bits FKPE (for PE) | sheet 1.4-2.2 |
| 5 | Centering pilots Ø 8 | sheet 1.4-2.4 |
| 6 | Stopplers | sheet 1.4-2.5 |
| 7 | Chambers, adapters, fittings | sheet 1.4-2.4 |
| 8 | Plug rods | sheet 1.4-2.5 |
| 9 | Motor drives | sheet 1.4-2.6 |