The set is designated for drilling into pipelines made of steel and PE as under medium positive pressure using:
- ballooning adapting pieces
- installed branch lines
- when installing branch pipes using branching T-pieces (Following the sheet the part 4 and 5 of this catalogue).
The set is supplied including basic accessories as specified in the set content description.
RANGE OF APPLICATION
Diameter of pipeline drilled: no limit
Diameter of drilled opening: *
ø56, 65 and 86 mm for PE pipeline
ø35, 47 and 57 mm for steel pipeline
Drilled pipeline material:
PE, steel, other material should be consulted with the manufacturer
Media:
Natural gas, water, other non-aggressive gases or liquids. Other media should be consulted with the manufacturer
Maximum pressure in the drilled pipeline: *
Up to 4 bar
Working temperature: viz. sheet 1.2
* The range may be modified using optional accessories (Following the sheet 1.2-2) to values specified in 1.2
TECHNICAL PARAMETERS
Dimension of the drilled in body connection thread:
G2” outer diameter to EN 228-1:2003
Overall length with drilling rod fully retracted (without chamber being assembled):
Drilling rod 18/750 - 730 mm
Drilling rod 18/1100 - 1080 mm
Maximum drilling rod protrusion with flanged adapter attached (measured from the flange contact surface):
Drilling rod 18/750 - 340 mm (+ 70 mm with movement body fully screwed in)
Drilling rod 18/1100 - 690 mm (+ 70 mm with movement body fully screwed in)
Maximum drilling rod protrusion with assembled chamber F-M 2”-2.5” L95 (measured from the contact surface of the of connection thread):
Drilling rod 18/750 - 270 mm (+ 70 mm with movement body fully screwed in)
Drilling rod 18/1100 - 620 mm (+ 70 mm with movement body fully screwed in)
Maximum width:
200 mm
Weight of assembled set (with flanged adapter) / weight including transport box::
9 (13) / 41 kg
OPTIONAL ACCESSORIES
| Item No. | Name | Catalogue No. | |
| 1. | Set COMPACT-F1/PE-OCEL | 121-1400-001 | |
| The set contains: | |||
| 2. | Drilling body COMPACT-F1 PN 16 | 122-2000-001 | 1pcs |
| 3. | Drilling rod 18/750 | 142-2101-075 | 1pcs |
| 3. | Drilling rod 18/1500 | 142-2101-150 | 1pcs |
| 4. | Pressure gauge angle piece 0 - 4 bar | 142-2405-400 | 1pcs |
| 5. | Drilling bit FKS 35 | 142-2200-035 | 2pcs |
| 5. | Drilling bit FKS 46 | 142-2200-046 | 2pcs |
| 5. | Drilling bit FKS 57 | 142-2200-057 | 2pcs |
| 6. | Drilling bit FKPE 56 | 142-2207-056 | 1pcs |
| 6. | Drilling bit FKPE 65 | 142-2207-065 | 1pcs |
| 6. | Drilling bit FKPE 86 | 142-2207-086 | 1pcs |
| 7. | Centering pilot 8/100 | 142-2403-002 | 2pcs |
| 8. | Chamber F-M 2"-2,5" L42 | 142-2401-001 | 1pcs |
| 9. | Chamber F-M 2"-2,5" L95 | 142-2401-003 | 1pcs |
| 10. | Flanged adapter COMPACT-F1/PE | 142-2402-001 | 1pcs |
| 11. | Ball valve FF 2,5" PR 65 | 212-2010-004 | 1pcs |
| 12. | Plug rod with internal square | 142-2502-001 | 1pcs |
| 13. | Adapter for stopper with a internal square end | 142-2502-031 | 1pcs |
| 14. | Protective case | 122-2000-003 | 1pcs |
| 15. | Allen wrench No.3 | 142-2103-003 | 1pcs |
| 16. | Allen wrench No.5 | 142-2103-005 | 1pcs |
| 17. | Ratchet ½” | 142-2103-001 | 1pcs |
| 18. | Hook spanner 75 - 80 | 142-2103-075 | 1pcs |
| 19. | Spanner No.22 | 142-2104-022 | 1pcs |
| 20. | Spanner No.27 | 142-2104-027 | 2pcs |
| 21. | Fixing strap with ratchet 5m | 122-2000-005 | 2pcs |
| 22. | Sealing tape PTFE GAS 15mm | 212-2010-037 | 1pcs |
| 23. | Transport box COMPACT-F1 | 122-2000-002 | 1pcs |
| 24. | Spare parts set COMPACT-F1 | 122-2000-004 | 1 set |