FASTRA, s.r.o. / Set S1212 / P

Set S1212 / P

The set is designated for straight transversal cutting of pipelines, diameter range DN/ID 65-700 mm or, as the case may be, other materials in the range as specified on the sheet 3.1. The fixing preparation DN150-500 off this set is equipped with the compressed air push on system. Maximum height above the surface of the cut pipeline: 900 mm Weight of the set with the fixing preparation Dn150-500/weight with transport box: 28/43 kg

For other parameters following the sheet 3.1.

CONTENT OF SET S 1212 / P
Item No. Name Catalogue No.  
  Set S 1212/P 311-1100-002  
       
  The set contains:    
1. Drive unit S1212/P 312-1100-002 1pcs
2. Locking tape 312-1100-003 1pcs
3. Clamping fixture DN65-150 312-1100-004 1pcs
4. Clamping fixture DN150-500/P 312-1100-006 1pcs
5. Clamping chain S1212 700 312-1100-008 2pcs
6. Side wrench No. 13 142-2104-013 1pcs
7. Side wrench No. 24 142-2104-024 1pcs
8. Saw blade 25x400 (DN200) 312-2001-400 2pcs
8. Saw blade 50x770 (DN700) 312-2001-770 2pcs
  Optional accessories    
  Saw blades sheet 3.1-2   
  Cutting emulsion sheet 3.1-2  
  Bronze tools sheet 3.1-2  
  Transport box S1212 sheet 3.1-2  
  Pneumatic powered accessories sheet 3.1-2  
2-03-2020, 21:45
Zpět na stránky