FASTRA, s.r.o. / Device UDP-F1

Device UDP-F1

The UDP-F1 device is used for the temporary closing of pipelines with interior gas media positive pressure using closing balloons.

APPLICATION AND DESCRIPTION

The UDP-F1 device is used for the temporary closing of pipelines with interior gas media positive pressure using closing balloons. The balloon is made of special antistatic rubber fixed to a plastic hose with pressed in safety quick acting coupling system installed in the loading chamber with a de-aeration valve. It is introduced to the pipeline through a loading fitting. The pipeline is closed upstream a closing element by filling the balloon with air or an inert gas. The devices UDP-F1 are designed and manufactured as kit systems allowing for a high level of variability. Normally they are supplied as the below described sets or sets individual configured based on customer´s requirements. The application range of individual sets may be extended using optional accessories (following the sheet 2.3-2). The devices comply with requirements of CSN EN 1775:2008, art. 8.2.3. as they are designed in a way excluding any leak of media during any operation.

RANGE OF APPLICATION DEVICE UDP-F1

Diameter and material of the closed pipeline:
Steel pipeline DN/ID 20 - 80mm (¾“ to 3“)
PE pipeline dn/OD 25-90mm
Media:
Natural gas, water, other non-aggressive gases,other media subject to consultation with the manufacturer.
Maximum pressure inside the closed pipeline:
0,6 bar
Maximum balloon filling pressure:
2,0 bar
Working temperature:
-10/+70°C

2-03-2020, 12:46
Zpět na stránky