Standard sets are composed of individual RUP-F2 device elements to allow for systemic and complex execution of works in the scope as specified below.
TECHNICAL PARAMETERS
Total length with the loading rod fully retracted:
T, TL 270-330 mm (depening on the dimension), Special 340 mm
Maximum protrusion of the loading rod (measured from the chamber edge):
T, TL 150-210 mm (according to the dimension), Special 150 mm
Set weight including the transport box:
T/TL/L9/10/8 kg, Special 6.5 kg
RANGE OF APPLICATION OF INDIVIDUAL SETS
| RANGE OF APPLICATION OF INDIVIDUAL SETS WITH BASIC ACCESSORIES | |||||
| Closed pipe internal diameter | |||||
| Set | Accessory | Steel DN/ID [mm] | PE dn/OD [mm] | Connection thread dimension | Catalogue No. |
| RUP-F2/T | loading rods | 15 - 50 | 20 - 63 | G1/2“ to G2“ external* | 231-1200-010 |
| RUP-F2/TL | loading rods | 15 - 50 | 20 - 63 | G1/2“ to G2“ external* | 231-1200-020 |
| RUP-F2/TL | cable hose | 20 - 50 | 20 - 63 | G3/4“ to G2“ external* | 231-1200-020 |
| RUP-F2/L | cable hose | 20 - 50 | 20 - 63 | G3/4“ to G2“ external* | 231-1200-030 |
| RUP-F2/special | control key | 20 - 50 | 20 - 63 | G3/4“ to G2“ external* | 231-1200-040 |
* Sets with internal thread may be manufactured on request
For the content of individual chapters following the sheet 2.3-1.2