Set KNS - F1

Set KNS - F1

Catalog sheet: 1.1-1.1

The set is designated for the drilling of openings to pipelines made of steel or PE with internal positive media pressure using ballooning adapter with an outer thread 2 ½ “ and ball closure. This set is configured as an accessory system to ballooning sets and therefore, the ball closure is not included. The set is supplied with basic accessories as specified below in the set content description.

Diameter of pipeline drilled: no limit
Diameter of drilled opening: *
ø56 mm for PE pipeline
ø57 mm for steel pipeline
Drilled pipeline material:
Steel, PE, other material should be consulted with the manufacturer
Natural gas, water, non-aggressive gases or liquids. Other media should be consulted with the manufacturer
Maximum pressure in the drilled pipeline: *
up to 6 bar
Working temperature: viz. sheet 1.1
* The range may be modified using optional accessories (Following the sheet 1.1-2) to values specified in 1.11.

Connection thread dimension:
G2 ½ outer diameter to EN 228-1:2003
Overall length with rod fully retracted (measured from the contact end of connecting thread):
970 mm
Maximum drilling rod protrusion (measured from the contact end of connecting thread):
340 mm
Pressure arm width:
200 mm
Weight of assembled set / weight including transport box:
9 / 21 kg


Item No. Name Catalogue No.  
1. Set KNS-F1 111-1100-001  
  The set contains:    
2. Chamber KNS-F1 with drilling rod 112-1100-001 1pcs
3. Pressure arm KNS F1 112-1100-003 1pcs
4. Pressure gauge unit straight 0-6 bar 142-2404-600 1pcs
5. Drilling bit FKS 57 142-2200-057 2pcs
6. Drilling bit FKPE 56 142-2207-056 1pcs
7. Centering pilot 8/100 142-2403-002 1pcs
8. Arm anchor bolt KNS-F1 112-1100-004 2pcs
9. Arm locking bolt KNS-F1 112-1100-005 1pcs
10. Allen wrench No. 3 142-2103-003 1pcs
11. Spanner No. 22 142-2104-022 1pcs
12. Spanner No. 27 142-2104-027 1pcs
13. Ratchet ½“ 142-2103-001 1pcs
14. Transport box KNS-F1 112-1100-002 1pcs
15. Spare parts set KNS-F1 112-1100-006 1 set
  Pressure gauge parts sheet 1.4-2.3  
  Drilling bits FKS (for steel) sheet 1.4-2.2  
  Drilling bits FKPE (for PE) sheet 1.4-2.2  
  Centering pilot Ø 8 sheet 1.4-2.3  
  Motor drives sheet 1.4-2.5